Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Preparing a cable to test thermal runaway |
|---|---|
| + | [* 10] To test runaway protection (or MAXTEMP protection) you need to shortcut the thermistor pins on the Rambo board. |
| + | [* 1] You will need a Female to Female Dupon cable to shortcut the thermistor connector. |
| + | [* 1] Alternatively you can cut an old thermistor and connect both wires together (those that are connected on the connector side). |