Changes to Step #8
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Runaway protection for Hotend (1/2) | |
| - | [* black] Turn the printer off. |
| + | [* black] Turn the printer off and then on. |
| [* black] Unplug the hotend thermistor wires. | |
| [* orange] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S). | |
| [* green] Rambo Einsy hotend thermistor connector (MK3 and MK3S). | |
| - | [* black] Plug the little adapter you build in the previous step to shortcut the hotend thermistor connector. |
| - | [* black] Preheat the hotend and extruder for PLA filament through the ''preheat menu'' of your printer. |