Changes to Step #8
Edit by 3D_Gussner —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Thermal Runaway Error for Hotend (1/2) | |
| [* 1] Turn the printer off and then on. | |
| - | [* 1] Unplug the hotend thermistor wires: |
| + | [* 1] Unplug the ***hotend thermistor*** wires: |
| [* 3] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S). | |
| [* 5] Rambo Einsy hotend thermistor connector (MK3 and MK3S). |