Changes to Step #10
Edit by 3D_Gussner —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Thermal Runaway Error for Heated Bed (1/2) | |
| [* black] Turn the printer off and then on. | |
| - | [* black] Unplug the ***bed thermistor*** wires: |
| + | [* black] Unplug the ***heated bed thermistor*** wires: |
| [* orange] Rambo Mini heated bed thermistor connector (MK2, MK2S, MK2.5 and MK2.5S). | |
| [* green] Rambo Einsy heated bed thermistor connector (MK3 and MK3S). |