Changes to Step #10

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Thermal Runaway Error for Heated Bed (1/2)
-[* 1] Turn the printer off and then on.
+[* 1] Turn the printer off.
[* 1] Unplug the ***heated bed thermistor*** wires:
[* 3] Rambo Mini heated bed thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
[* 5] Rambo Einsy heated bed thermistor connector (MK3 and MK3S).