Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Grégoire Saunier

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Thermal Runaway Error for Heated Bed (1/2)
[* black] Turn the printer off.
[* black] Unplug the ***heated bed thermistor*** wires:
[* orange] Rambo Mini heated bed thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
[* green] Rambo Einsy heated bed thermistor connector (MK3 and MK3S).
-[* black] Unplug the Dupon test cable and plug back the ***heated bed thermistor***.Make sure that the displayed bed temperature is back to a normal value.
+[* black] Plug both sides of you Dupon cable into the ***heated bed thermistor connector*** on the controller board.
[* black] Turn the printer on.