Changes to Step #11
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Thermal Runaway Error for Heated Bed (2/2) | |
| + | [* 1] Turn the printer on. |
| [* 2] The ***Err: MAXTEMP BED*** error message must be displayed on the printer immediately after the printer has started. | |
| [* 6] The displayed heated bed temperature should show a very high value. (See example picture: ***368***/0°) | |
| [* 9] If this step behaves differently please verify your connection and firmware. If it continues stop using your printer and contact us or ask for help. |