Changes to Step #13
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Preheat Error for Hotend (2/2) |
|---|---|
| + | [* 1] Once the hotend temperature is bigger than 80°C, unplug the hotend heater from the Rambo board. |
| + | [* 2] After few minutes and you must have the ***PREHEAT ERROR*** message displayed. |
| + | [* 6] The targeted temperatures must be set to ***0°C***. |
Image 1
No previous image
Added