Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Grégoire Saunier

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Preheat Error for Hotend (2/2)
[* black] Once the hotend temperature is bigger than 80°C, unplug the hotend heater from the Rambo board.
[* red] After few minutes and you must have the ***PREHEAT ERROR*** message displayed.
[* light_blue] The targeted temperatures must be set to ***0°C***.
+[* black] Plug back the hotend heater.
+[* black] Turn the printer off.