Changes to Step #14
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Preheat Error for Heated Bed (1/2) |
|---|---|
| + | [* 1] Turn the printer off and then on. |
| + | [* 1] Locate the heated bed heater connector on your Rambo board: |
| + | [* 3] Rambo Mini heated bed heater connector (MK2, MK2S, MK2.5 and MK2.5S). |
| + | [* 5] Rambo Einsy heated bed heater connector (MK3 and MK3S). |
| + | [* 4] Preheat the heated bed and extruder for PLA temperature through the preheat menu of your printer. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added