Changes to Step #14
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Preheat Error for Heated Bed (1/2) | |
| [* 1] Turn the printer off. | |
| [* 1] Locate the heated bed heater connector on your controller board: | |
| [* 3] Rambo Mini heated bed heater connector (MK2, MK2S, MK2.5 and MK2.5S). | |
| [* 5] Rambo Einsy heated bed heater connector (MK3 and MK3S). | |
| + | [* 1] Unplug the ***heated bed heater*** from the controller board. |