Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #15

Edit by Grégoire Saunier

Edit approved by Grégoire Saunier


Step Lines

[title] Preheat Error for Heated Bed (2/2)
-[* black] Turn the printer on.
-[* black] Preheat the heated bed and extruder for PLA temperature through the ''Preheat'' menu of your printer.
[* red] After around 2 minutes you should get the ***BED THERMAL RUNAWAY*** message displayed on the printer.
[* light_blue] Set targeted temperatures back to ***0°C*** via ''Preheat/Cooldown'' or ''Settings/Temperature'' menu.
[* black] Plug back the bed heater and let the hotend cool down ***under 50°C***.
[* black] Turn the printer off after hotend and heated bed are cooled down.
[* icon_caution] If this step behaves differently please verify your connection and firmware. If it continues stop using your printer and contact us or ask for help.