Changes to Step #15
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Preheat Error for Heated Bed (2/2) | |
| [* black] Once the heated bed temperature is bigger than 50°C, unplug the heated bed heater from the Rambo board. | |
| [* red] After few minutes and you must have the ***BED THERMAL RUNAWAY*** message displayed. | |
| [* light_blue] The targeted temperatures must be set to ***0°C***. | |
| + | [* black] Plug back the bed heater. |
| + | [* black] Turn the printer off. |