Changes to Step #16
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Hotend Fan (1/2) |
|---|---|
| + | [* 1] Turn the printer off and then on. |
| + | [* 1] Locate the hotend fan connector on your Rambo board: |
| + | [* 3] MK2 and MK2S Rambo Mini hotend fan connector. |
| + | [* 8] MK2.5 and MK2.5S Rambo Mini hotend fan connector. Locate the adapter which will be easier to unplug for the next step. |
| + | [* 5] Rambo Einsy hotend fan connector (MK3 and MK3S). |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added