Changes to Step #16

Edit by 3D_Gussner —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Hotend Fan (1/2)
[* 1] Turn the printer off and then on.
-[* 1] Locate the hotend fan connector on your Rambo board:
+[* 1] Locate the hotend fan connector on your controller board:
[* 3] MK2 and MK2S Rambo Mini hotend fan connector.
[* 8] MK2.5 and MK2.5S Rambo Mini hotend fan connector. Locate the adapter which will be easier to unplug for the next step.
[* 5] Rambo Einsy hotend fan connector (MK3 and MK3S).