Changes to Step #17
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Hotend Fan (2/2) |
|---|---|
| + | [* 4] Preheat the hotend to 80°C through the _settings -> temperature_ menu of your printer. |
| + | [* 1] Once the hotend temperature reach 80°C, unplug the hotend fan connector. |
| + | [* 2] After few seconds you must have the ***Err: EXTR. FAN ERROR*** error message displayed. |
| + | [* 6] The targeted temperatures must be set to ***0°C***. |
Image 1
No previous image
Added
Image 2
No previous image
Added