Changes to Step #17
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Hotend Fan (2/2) | |
| [* 4] Preheat the hotend to 80°C through the _settings -> temperature_ menu of your printer. | |
| [* 1] Once the hotend temperature reach 80°C, unplug the hotend fan connector. | |
| [* 2] After few seconds you must have the ***Err: EXTR. FAN ERROR*** error message displayed. | |
| [* 6] The targeted temperatures must be set to ***0°C***. | |
| + | [* 1] Quickly plug back the hotend thermistor and let the hotend cool down under 50°C. |
| + | [* 1] Turn the printer off. |