Changes to Step #2

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Preparation
[* 1] Unload the filament present in your hotend.
[* 1] Move the extruder all the way up.
[* 1] Open the Rambo cover lid.
+[* 1] If at some point you are unsure about wiring check careful the Prusa manual pages.
+[* 10] The Rambo board images are coming from the Prusa manual pages: https://manual.prusa3d.com