Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Assemble Body Front |
|---|---|
| [* 5] Secure the top of the nozzle fan with an M3x25 screw and the printed par ''nozzle_fan_spacer'' | |
| [* 6] Tighten an M3x8 screw | |
| [* 4] Secure the ''nozzle_fan_duct'' with an M3x10 screw | |
| [* 2] Finish to secure the nozzle fan with an M3x25 screw and a washer | |
| [* 1] Connect the stepper cable. Pass nozzle fan and stepper cables into the little groove of the ''body_front'' |