Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Assemble Body Front | |
| [* 5] Secure the nozzle fan to the ''body_front'' with an M3x25 screw and the printed part ''nozzle_fan_spacer''. | |
| [* 7] Tighten an M3x8 screw | |
| [* 4] Secure the ''nozzle_fan_duct'' with an M3x10 screw | |
| [* 2] Finish to secure the nozzle fan with an M3x25 screw and a washer | |
| + | [* 9] To avoid breaking the nozzle fan, make sure you have used the washer as seen on the second picture. |