Changes to Step #8
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 4] Assemble ''body_back'' with two M3x8 screws. Make sure to not pinch any wire. |
|---|---|
| + | [* 7] add two square nuts in the opening of the ''body_back'' |
| + | [* 5] Secure the body back with two M3x40 screws |
| + | [* 8] Secure the cable cover with an M3x10 screw |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added