Changes to Step #8
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Assemble Body Back |
|---|---|
| [* 4] Assemble ''body_back'' with two M3x8 screws. Make sure to not pinch any wire. | |
| [* 5] Secure the body back with two M3x40 screws | |
| [* 8] Secure the cable cover with an M3x10 screw | |
| [* 9] Verify that no wire are pinched |