Changes to Step #9

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Assemble X Carriage
[* 4] Insert five M3 hex nuts in the back of the ''x_carriage''
-[* 7] Insert a M3 square nut on the back of the ''pinda_mount''
+[* 7] Insert an M3 square nut on the back of the ''pinda_mount''
[* 5] Install the ''pinda_mount'' on the ''body_back'' and secure it with an M3x10 screw