Changes to Step #11
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Assemble Pinda And Hotend Fan |
|---|---|
| [* 9] Do not use the Noctua coming with your Prusa printer, it is not strong enough for the Hemera. As of today the E3D fan specs are unknown and so we recommend to use the fan that comes with your Hemera. | |
| [* 7] Secure the ''pinda_mount'' on the ''x_carriage'' with an M3x14 screw. The Pinda should be out in the bottom by approx. 11mm | |
| [* 2] Attach the Hemera fan with the corresponding screws | |
| [* 4] Create a small loop for the fan wires | |
| [* 5] Route all wires are shown in the last image | |
| [* 1] New line. |