Changes to Step #12
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 5] Insert two M3 square nuts |
|---|---|
| + | [* 1] Attach the Hemera on the Bear X axis (only the bearings are visible on this picture) |
| + | [* 7] Close the top bearings using four M3x18 screws and the top of ''x_carriage_back'' |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added