Changes to Step #10
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 7] Secure the Pinda on the ''pinda_mount'' with an M3x10 screw. The Pinda should be out in the bottom by approx. 10mm |
|---|---|
| + | [* 1] Route the stepper motor, nozzle fan and Pinda as shown in the second image. Make sure to not pinch any wires |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added