Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Configure the printer |
|---|---|
| + | [* 1] From the printer's menu, disable fan check with the menu ***Settings -> Fans check - On / Off*** |
| + | [* 10] This is useful because the Hemera fan does not have a third wire to read the rotation |
| + | [* 1] From the printer's menu, disable filament sensor with the menu ***Settings -> Filament sensor - On / Off*** |
| + | [* 10] For now the Bear Hemera does not have filament sensor, it is then better to disable it |