Changes to Step #9
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Update PrusaSlicer profiles |
|---|---|
| + | [* 3] In PrusaSlicer, go to ***Printer Settings -> Extruder 1*** and reduce the retraction length to 0.5mm |
| + | [* 10] The Hemera has a much shorter filament path and very efficient cooling. If you use a too long retraction you might clog the Hemera. E3D recommends to use a 0.5mm retraction length as a starting point. |
| + | [* 9] This setting might be overridden by filament settings, make sure to check those as well. |
Image 1
No previous image
Added