Changes to Step #10
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Calibration and Self Tests |
|---|---|
| + | [* 9] With the BearMera, the bed calibration and self test will fail and should not be executed. |
| + | [* 2] Bed calibration fails because of the geometry of the extruder. The Pinda and the nozzle have different positions. |
| + | [* 2] The self test will fail because of the E3D fan which does not have the rotation sensor. It will also fail because of the bed calibration. |
| + | [* 9] The bed calibration could potentially crash the nozzle which would damage the bed surface. |