Changes to Step #6
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Testing hotend fan |
|---|---|
| + | [* 1] From the printer's menu ***Settings -> Temperature -> Nozzle***, set the nozzle temperature to 80°C. |
| + | [* 1] Return to info screen (main screen) |
| + | [* 1] Verify that the hotend fan is starting as soon as the temperature gets higher than 50°C. |
| + | [* 1] Let the hotend cooling down using the printer's menu ***Preheat -> Cooldown***. |
| + | [* 9] If this test fails, do not attempt to print or use your printer. Verify carefully the wiring of your hotend on both side extruder and Einsy. |