Changes to Step #6

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Testing hotend fan
[* 1] From the printer's menu ***Settings -> Temperature -> Nozzle***, set the nozzle temperature to 80°C.
[* 1] Return to info screen (main screen)
[* 1] Verify that the hotend fan is starting as soon as the temperature gets higher than 50°C.
[* 1] Let the hotend cooling down using the printer's menu ***Preheat -> Cooldown***.
-[* 9] If this test fails, do not attempt to print or use your printer. Verify carefully the wiring of your hotend on both side extruder and Einsy.
+[* 9] If this test fails, do not attempt to print or use your printer. Verify carefully the wiring of your hotend.