Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Testing the nozzle fan |
|---|---|
| + | [* 1] From the printer's menu Settings -> Temperature -> Fan speed, set the fan speed to 130. |
| + | [* 1] The nozzle fan (front fan) should now rotate at half speed. |
| + | [* 9] If this test fails, do not attempt to print or use your printer. Verify carefully the wiring of your nozzle fan. |