Changes to Step #7

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Testing the nozzle fan
[* 1] From the printer's menu Settings -> Temperature -> Fan speed, set the fan speed to 130.
[* 1] The nozzle fan (front fan) should now rotate at half speed.
-[* 9] If this test fails, do not attempt to print or use your printer. Verify carefully the wiring of your nozzle fan.
+[* 9] If this test fails, do not attempt to print or use your printer. Carefully verify the wiring of your nozzle fan.