Changes to Step #8

Edit by Florian Daeubler —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Filament sensor assembly
[* 6] Insert the steel ball in the dedicated pocket of the ''extruder_body''.
-[* 6] Verify the steel ball is rolling smoothly and easily, inside its pocket.
+[* 6] Verify that the steel ball is rolling smoothly inside its pocket.
[* 5] Insert the ''filament_sensor_lever''.
[* 10] You can use a flat screwdriver to keep the steel ball in its pocket when inserting the ''filament_sensor_lever''.
-[* 3] Test the ''filament_sensor_lever'' is moving correctly with a piece of filament.
+[* 3] Test if the ''filament_sensor_lever'' is moving correctly with a piece of filament.