Changes to Step #9
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Filament sensor assembly |
|---|---|
| + | [* 9] In order to avoid electrostatic discharge to the filament sensor, touch something metallic that is linked to the ground. Like pipework or a faucet. |
| + | [* 3] Carefully secure the Prusa IR sensor with an M2x8 screw. Do not over tighten. |
| + | [* 6] Adjust the Prusa IR sensor to make sure that it is parallel to the border of the pocket. Finish tightening the screw; it only needs to be tightened sufficiently to hold the sensor in place |
Image 1
No previous image
Added
Image 2
No previous image
Added