Changes to Step #12
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Extruder idler preparation |
|---|---|
| + | [* 3] Locate the Bondtech drive gear. This is the one that has NO set screw. |
| + | [* 6] Lubricate the needle bearings with a dab of lithium based grease |
| + | [* 5] Slide the two Bondtech needle bearings into the Bondtech drive gear. |
Image 1
No previous image
Added
Image 2
No previous image
Added