Changes to Step #23
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Print fan shroud assembly |
|---|---|
| + | [* 6] Make sure you have broken the support for the ''nozzle_fan_duct''. |
| + | [* 2] Insert the print shroud. If necessary, slightly unscrew the print fan. |
| + | [* 5] Use an M3x10 screw to attach the shroud and secure the print fan. |
Image 1
No previous image
Added
Image 2
No previous image
Added