Changes to Step #1

Edit by Florian Daeubler —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] X carriage preparation
-[* 3] Insert four M3 square nuts on the ''x_carriage_back''
+[* 3] Insert four M3 square nuts in the ''x_carriage_back''
[* 10] Tweezers are handy to insert those square nuts.
-[* 10] If you have trouble inserting the top left square nut, slowly unscrew the M3x40mm screw just above.
+[* 10] If you have trouble inserting the top left square nut, slowly unscrew the M3x40mm screw until you can insert the nut.