Changes to Step #4
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Attach the X belt |
|---|---|
| + | [* 3] Slide one end of the 2GT drive belt into the right side of the ''x_carriage''. |
| + | [* 9] Verify that the belt is fully inserted into the slot and that it extends into the central space. |
| + | [* 6] Route the drive belt through the ''x_end_motor'', around the drive pulley and back out through the ''x_end_motor''. |
Image 1
No previous image
Added
Image 2
No previous image
Added