Changes to Step #6
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Cable guide back |
|---|---|
| + | [* 3] Hold ''cable_guide_back_a'' and ''cable_guide_back_b'' together |
| + | [* 5] Slide an M3x40 screw through them |
| + | [* 7] Screw the M3x40 screw into the ''x_carriage'' |
| + | [* 9] The M3x40 screw should be at a slight angle to the horizontal while you are tightening it. |
Image 1
No previous image
Added
Image 2
No previous image
Added