Changes to Step #6

Edit by Florian Daeubler —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Cable guide back
[* 3] Hold ''cable_guide_back_a'' and ''cable_guide_back_b'' together
-[* 5] Slide an M3x40 screw through them
+[* 5] Slide a M3x40 screw through them
[* 7] Screw the M3x40 screw into the ''x_carriage''
[* 9] The M3x40 screw should be at a slight angle to the horizontal while you are tightening it.