Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] X carriage back bottom and cables |
|---|---|
| + | [* 2] Carefully gather the Extruder motor, hotend fan, PINDA and nozzle fan cables, into a single bundle. Make sure that the cables are routed through the channels provided for them, as shown in the first image |
| + | [* 5] Slide the bottom of the ''x_carriage_back'' carefully over the cable bundle. Ensure that the cables are in their channels and that none of the cables are pinched against the ''x_carriage'' or ''x_carriage_back''. |
| + | [* 6] Secure the bottom of the ''x_carriage_back'' with one M3x18 screw, |
| + | [* 4] and two M3x10 screws. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added