Changes to Step #10
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Extruder cables |
|---|---|
| + | [* 8] Gather the extruder cable bundle, the 3mm nylon stiffener and the hotend cables together. |
| + | [* 4] Continue to wrap the textile sleeve around all of the cables right up to the end. |
| + | [* 7] Trim the two bottom zip ties. |
| + | [* 5] Add 3 zip ties to secure the textile sleeve to the top of the ''cable_guide_back''. Ensure that the ties are arranged as shown. |
| + | [* 6] Add one more zip tie after the junction with hotend and nylon cables. |
| + | [* 2] Trim the zip ties. |
| + | [* 10] It is important that the heads of the zip ties are arranged, so that they are at the top or bottom of the cable bundles, otherwise they may interfere with the full travel of the extruder along the x-axis. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added