Changes to Step #2
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Trapezoidal nuts adjustment | |
| [* 1] Plugin and turn on the printer. | |
| [* 5] Using the screen menu, move the X axis up until it crashes in to the Z tops. The stepper motors will skip, making a noise - this will not damage the motors. | |
| [* 4] Using the screen menu, move the X axis down until the nozzle is approximately 10-15mm from the heated bed. | |
| + | [* 10] If your printer can't reach Z top, move the X axis a little down, unplug the printer and plug it back. You can now reach Z tops. |