Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Trapezoidal nuts adjustment |
|---|---|
| + | [* 2] If you have applied tension to the belt, unscrew the belt tensioner on ''x_end_idler'' until the belt is relaxed. |
| + | [* 7] Loosen the screws which secure the trapezoidal nuts. This is to ensure that the Trapezoidal nuts 'self-centre' on the lead screws. |
| + | [* 4] Make sure the trapezoidal nuts are moving freely. |
| + | [* 5] Tighten the 4 screws alternately (on both sides). Don't apply any lateral force on the trapezoidal nuts. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added