Changes to Step #10
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Connect your printer |
|---|---|
| + | [* 3] Get a USB A to B cable. |
| + | [* 5] Connect the USB cable on the Mini-Rambo / Einsy-Rambo. |
| + | [* 1] Connect the other side of the USB cable to your computer that is running PrusaSlicer. |
| + | [* 10] We recommend that you use PrusaSlicer to flash firmware. |
| + | [* 1] Turn on the printer. |
Image 1
No previous image
Added
Image 2
No previous image
Added