Changes to Step #10

Edit by Florian Daeubler —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Connect your printer
[* 3] Get a USB A to B cable.
-[* 5] Connect the USB cable on the Mini-Rambo / Einsy-Rambo.
-[* 1] Connect the other side of the USB cable to your computer that is running PrusaSlicer.
-[* 10] We recommend that you use PrusaSlicer to flash firmware.
+[* 5] Connect the USB cable to the Mini-Rambo / Einsy-Rambo.
+[* 1] Connect the other side of the USB cable to a computer that is running PrusaSlicer.
+[* 10] We recommend to you use PrusaSlicer to flash the firmware.
[* 1] Turn on the printer.