Changes to this Step

Edit by Florian Daeubler —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Download stock firmware
-[* 9] We recommend to now flash back the stock Prusa firmware. The custom firmware is only needed for (XY)Z Calibration and Selftest, all other features of the original firmware are working normally. If you like you can continue to use our custom firmware at your own risk.
+[* 9] At this point we recommend to flash back stock Prusa firmware. The custom firmware is only needed for (XY)Z Calibration and Selftest, all other features of the original firmware are working normally. If you like you can continue to use our custom firmware at your own risk.
[* 1] Select and download the latest Prusa firmware here: [https://www.prusa3d.com/drivers/|prusa3d.com/drivers] :
[* 1] ***MK3S Einsy-Rambo 10a*** firmware name: ''FW_MK3S-EINSy10a.hex''
[* 1] ***MK2.5S Mini-Rambo 13a*** firmware name: ''FW_MK25S-RAMBo13a.zip''
[* 1] ***MK2.5SMini-Rambo 10a*** firmware name: ''FW_MK25S-RAMBo10a.zip''
[* 10] MK2.5S firmware comes as a ZIP files containing several languages of the firmware. Extract the ZIP file and choose the language you prefer the most.
[* 10] If you don't know which Mini-Rambo board you have, please refer to [https://www.prusa3d.com/downloads/firmware/EN-how-to-choose-firmware-MK25.pdf|this document]