Changes to Step #15
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Assembling X Axis On Z Axis |
|---|---|
| + | [* 10] These steps are using the Bear Upgrade frame 2.1 as example but can be applied to Original Prusa frame and previous Bear Upgrade frame version. |
| + | [* 4] Install the Z axis tops and tighten them. |
| + | [* 7] ***Bear Upgrade frame only:*** Make sure the ''z_tops'' are flush with the Z smooth rods on both sides |
| + | [* 2] ***Bear Upgrade frame only:*** Tighten the ''z_ends_caps'' back in place. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added