Changes to Step #6

Edit by Pranas Ramanauskas —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] X carriage assembly
[* 3] Verify that the M3x25mm screws are snug
[* 7] Using an M3x10 screw attach the ''extruder_body'' to the ''x_carriage''.
[* 5] Using an M3x40 screw and an M3 washer attach the ''extruder_body'' to the ''x_carriage''.
-[* 9] Verify that ''extruder_body'' and ''x_carriage'' are correctly align. Adjust if necessary with the M3x10 and M3x40 screws
+[* 9] Verify that ''extruder_body'' and ''x_carriage'' are correctly aligned. Adjust if necessary with the M3x10 and M3x40 screws